Assignment No. 01
Semester: Fall 2019
CS707: Network Security Total Marks: 20

Due Date:14/11/2019

Instructions
Please read the following instructions carefully before submitting assignment:
It should be clear that your assignment will not get any credit if:
 The assignment is submitted after due date.
 The submitted assignment does not open or file is corrupt.
 Solution is copied from any other source.
Objective
The objective of this assignment is to;
 Learn and practice using OMNET++ Simulator
 Simulate network attacks in OMNET++
 Understand how attack affect network performance
Assignment

In this assignment, we will be using OMNET++ Simulator (version 4.3) with INET (version inet-2.1.0) and NETA (version neta_v1-1.0) frameworks to create simple simulation scenario for network security attacks. This assignment is very simple and basic level in order to give you an idea regarding network attacks simulation. All you need is install OMNET++, configure INET and NETA frameworks and run a simple simulation as desired.

Your Task
Step 1: Download following three packages from LMS course download section
• OMNET++ version 4.3 (click here to download) Don’t install latest version of OMNET++ as NETA framework is compatible
• INET Framework version 2.1.0 (click here to download)
• NETA Framework version 1.0 (click here to download)
Step 2: Carefully read the attached document “NETA frameworkDescription.pdf” which provides details about the working and usage of NETA framework. For installation, please read and follow steps given in Chapter 4 of this document. First, you need to install OMNET++ Simulator, then INET framework and then NETA framework.
Step 3:
We will be simulating a Simple Delay Attack in this assignment and the scenario incudes three nodes as shown in following snapshot. Node[0] send data at some specific rate to Node[1] through attacker[0] node. Attacker[0] node forwards the packets after certain delay as configured in simulation.
8c06a152-073d-4db8-8558-ca15404323b6-image.png
Figure 1: Simple scenario for simulation of Delay attack.

Modify SimpleDelay.ini file attached with assignment file and change the seed-set value with last four digits of your student ID.
e11b2fd1-fbba-490c-8db4-c43b9d778c58-image.png
Afterwards, replace the SimpleDelay.ini inside SimpleDelayAttackScenario folder with this updated SimpleDelay.ini provided with assignment.
Step 4:
Provided SimpleDelay.ini file includes three different simulation scenarios with different packet delay rates as it can be seen in the last part of this file as below. You need to use your own ID in the configuration name.
5cc6be13-cbd1-4276-a610-173b55193857-image.png

You need to run and simulate each scenario and find the End-to-end delay for packets received at destination node i.e. Node 1 for each scenario.
Submission
You are required to submit TWO snapshot as shown below of your simulation results including results for the end-to-end delay of packets received at destination node 1 in each scenario through LMS.

Sample snapshot of desired result is given below and it was obtained with simulation seed-set value 6789. You have to run simulation with seed-set value as last four digit of your student ID and in that case simulation results will be different from the one given below.
b28c05c8-fecf-4c90-9916-bcbed1264bde-image.png

Figure 2: Desired snapshot 1

35b56751-fd60-47bd-a99f-b9d66d4d0d12-image.png
Figure 3: Desired snapshot 2 (legend must be visible)

You can watch helping

uploaded

section in order to get understanding about OMNET++, INET and NETA frameworks installation and configuration and how to perform desired simulation. This tutorial is actually simulating Dropping Attack whereas in this assignment you are required to simulate Delay Attack. Hope you can get an idea about simulating delay attack from the tutorial.

Assignment No. 02
Semester: Fall 2019
CS707: Network Security Total Marks: 20

Due Date:05/12/2019

Instructions
Please read the following instructions carefully before submitting assignment:
It should be clear that your assignment will not get any credit if:
 The assignment is submitted after due date.
 The submitted assignment does not open or file is corrupt.
 Solution is copied from any other source.
Objective
The objective of this assignment is to;
 Learn and practice using OpenSSL tool
 Learn creation of public and private keys
 Practical usage of AES and RSA algorithms for Encryption/Decryption

Assignment

In this assignment, we will be using OpenSLL tool to create your public and private keys and then use the same to encrypt and decrypt simple text file containing your VU student ID and name. This assignment is very simple and basic level in order to provide basic understanding of the working of security algorithms using OpenSSL tool. All you need is download and install OpenSLL, and run simple commands as desired in Task 1 and Task 2.

Step 1: Download OpenSLL (32bit or 64bit) from official website as per your system configuration from following link or course download section
https://slproweb.com/products/Win32OpenSSL.html
See following tutorial (first 04 min) for installation of OpenSSL

Step 2: Carefully read the content and material available at following links which provides necessary details about the working and usage of OpenSSL tool.
https://www.openssl.org/docs/man1.0.2/man1/openssl.html
https://www.keycdn.com/blog/openssl-tutorial
https://users.dcc.uchile.cl/~pcamacho/tutorial/crypto/openssl/openssl_intro.html

Task 1: Reveal the Secret Code
• SecretCode.txt file attached with this assignment contains a secret code and your task is to decrypt this file to get the secret code. This file is encrypted using AES algorithm with Electronic Code Book (ECB) mode having key size of 256-bits. Encryption password is abc123.
• After successful decryption, what is the secret code inside SecretCode.txt file?

Task 2 Decrypt Data File
• You need to use RSA algorithm to decrypt a given file EncryptedDataFile.txt.
• Both public key and private key files are also attached with assignment.
• The EncryptedDataFile.txt file is encrypted using public key.
• You task to decrypt EncryptedDataFile.txt file and reveal its contents in plain text format.

Submission
You are required to submit your solution in WM Word format containing:
• Revealed secret code inside SecretCode.txt file in plain text format.
• Revealed contents of inside EncryptedDataFile.txt file in plain text format.

Video Presentation of Academic Research Paper
For the presentation activity, students are required to record their video while presenting academic research paper slides, then put recorded video and slides in a zip file and upload it on VU-LMS. Therefore, each student is required to prepare PPTs of his/her academic research paper and then record his/her video while presenting the slides. Following are the guidelines in this regard:
PPT Slides:

Prepare presentation slides related to your academic research paper.
There must not be more than 20 slides in your PPT file.
First slide should contain student-ID, student-name, topic and course-name.
Your presentation should describe the problem statement, methodology and conclusion.
Save your presentation slides in .ppt or .pptx format.
Video Recording:
You have to formally present the slides with proper dress code and have to record the video of your presentation.
You can use any video recording facility such as web cam, camera, mobile phone etc. for recording of your presentation (Download link of the tutorial “Tips for Recording Videos” is provided in the assignment package).
The total time for recording should not exceed 10 minutes.
After recording your video, you have to convert it in “.3gp” format using any video conversion tool to reduce the size of the video file. (Download link of the tutorial “Video Compression” is provided in the assignment package).
After converting the video in .3gp format, review your file to verify that audio and video are playing properly.
Install VLC media player to view your compressed video before uploading on VU-LMS. You can download VLC from http://www.videolan.org/vlc/download-windows.html.
It is preferable to use English in your presentation in case of reluctance you can also use Urdu language.
Note that you will record your presentation standing in front of camera.
Students writing academic paper in group should submit presentation individually with their own video recording.
Submission:
Compress your video file and presentation file using any compression tool like WinZip or WinRAR.
Upload the compressed file (.zip or .rar) on VU-LMS. Make sure that its size should not exceed 30 MB.
Note: It is not required to show PPT slides in the recorded video.

Tips for Recording Videos:
http://vulms.vu.edu.pk/Courses/CS701/Downloads/Tips for Recording Videos.mp4

Video Compression:
http://vulms.vu.edu.pk/Courses/CS701/Downloads/Video Compression.mp4